PBS-63-50
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index.
Make an order
Detailed desctiption
PBS-90-150
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index.
PBS-90-100
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index.
2PBS-90-250
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index.
PBM-90-250
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-P-90-250
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-PP-90-250
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-P-120-300
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-PP-120-300
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-P-150-200
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive.
PBM-PP-150-200
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive
EBM-80-170 P
Electromagnetic drum separators of the EBM type are designed for regeneration of dense-media suspension with magnetite weighting material as well as for wet concentration of magnetite ores. Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
EBM-90-250
Electromagnetic drum separators of the EBM type are designed for regeneration of dense-media suspension with magnetite weighting material as well as for wet concentration of magnetite ores. Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
EVS-28-9
Electromagnetic roll separators of EVS type are designed for dry concentration of low-magnetic ores as well as for after treatment of concentrates and for iron removal and separation of material into non-magnetic, intermediate (one or two) and magnetic (one or two) products.
EVS-36-50
None
2EVS-36-100
Electromagnetic roll separators of EVS type are designed for dry concentration of low-magnetic ores as well as for after treatment of concentrates and for iron removal and separation of material into non-magnetic, intermediate (one or two) and magnetic (one or two) products.
.gif)
4EVM-40-250A (4EVM-40-250A32)
Electromagnetic roll separators of EVM type are designed for wet concentration of low-magnetic ores as well as for after treatment of concentrates and for iron removal and separation of material into non-magnetic or magnetic (one or two) products.
PBM-PPS-90-250
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive. The separators with internal and external drive are interchangeable as per their technical parameters, overall and setting dimensions. Curbs, end covers, boxes, bathes, discharge chutes, box receivers, feeding nipples are covered with antiwear polyurethane covering that provides service life for not less than 18000 hours (period between capital repairs).
PBS-90-150A
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index. According to customer’s request we can design and deliver PBS separators with drum diameter 1200 and 1500 mm and length from 1000 to 3000 mm with induction from 0,1 to 0,31 Tsl. The separators can be fitted with the device of frequency regulation of asynchronous motor that provides the possibility of tuning the separator on the necessary speed rate depending on the conditions of feed material. Instead of the old-fashioned chain drives we presently apply compact direct drives on the basis of two-stage right-angle speed reducers.
2PBS-90-250A
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index. According to customer’s request we can design and deliver PBS separators with drum diameter 1200 and 1500 mm and length from 1000 to 3000 mm with induction from 0,1 to 0,31 Tsl. The separators can be fitted with the device of frequency regulation of asynchronous motor that provides the possibility of tuning the separator on the necessary speed rate depending on the conditions of feed material. Instead of the old-fashioned chain drives we presently apply compact direct drives on the basis of two-stage right-angle speed reducers.
2PBS-90-150A
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index. According to customer’s request we can design and deliver PBS separators with drum diameter 1200 and 1500 mm and length from 1000 to 3000 mm with induction from 0,1 to 0,31 Tsl. The separators can be fitted with the device of frequency regulation of asynchronous motor that provides the possibility of tuning the separator on the necessary speed rate depending on the conditions of feed material. Instead of the old-fashioned chain drives we presently apply compact direct drives on the basis of two-stage right-angle speed reducers.
PBR-P-90-250A
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBR-P-80-170
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBR-P-80-170 A
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBR-P-90-250
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBR-P-90-250 A
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBM-120-300
Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBS-90-250
On the basis of mass products there are designed separators with high induction on the surface of the drums (0,25 Tsl), that allows to increase the productivity concentration by more than 20%. It is important due to the general iron impoverishment in feed material and for providing the operation stability of wet magnetic separation active lines. Identification of separators with high magnetic induction can be recognized by “A” index.
PBM-150-300M13
Electromagnetic drum separators of the EBM type are designed for regeneration of dense-media suspension with magnetite weighting material as well as for wet concentration of magnetite ores. Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance.
PBM-90-100B
Electromagnetic drum separators of the EBM type are designed for regeneration of dense-media suspension with magnetite weighting material as well as for wet concentration of magnetite ores. Magnetic drum separators of the PBR type are designed for regeneration of dense-media suspension with magnetite weighting material in plants for concentration of coal and shale. The separator is a single-drum aggregate with low feed; its drum rotation is against the run of separating material; it is working at a constant pulp level in a counter-flow bath with deep drum sinking (the pulp level is slightly higher than the drum axis). Application of magnetic systems with ferrite constant magnets allows to decrease operating costs, improve reliability, serviceability and maintenance. Separators with magnetic system
PBM-PP-150-300
The separators are designed for wet concentration of highly magnetic ores and materials, they are applied for equipping of concentrating mills, plants of ferrous metallurgy. The separator design allows to change position of the magnetic systems thus creating optimal mode of operation. The separators are designed with single-flow bath, counter flow bath and half counter flow bath. We also manufacture PBMCPP-90/250 separators with circulation bath that provides repeated cleaning of concentrate in one separator. It is possible to produce and supply PBM-120/300 and PBM-150/200 separators with circulation bath.
PBM-P-150-360
The drums of the separators are fitted with drives of motor-reduction type produced by Rudgormash both for internal and external position of the drives and their no-failure operation time is assured to be not less than 18000 hours during the period between two capital repairs. Motor-reducers by Bonfiglioli, Nord etc. can be applied in an external drive. The separators with internal and external drive are interchangeable as per their technical parameters, overall and setting dimensions. Curbs, end covers, boxes, bathes, discharge chutes, box receivers, feeding nipples are covered with antiwear polyurethane covering that provides service life for not less than 18000 hours (period between capital repairs).